Sontronics Mercury Tube Microphone Setup & Polar Patterns

Sontronics · Microphones

Connect the Mercury through its dedicated power supply and use the pattern, pad and filter controls during a studio session.

Sources checked November 20, 2026

Gold Sontronics Mercury valve condenser microphone in its shockmount

Official manufacturer documents

Mercury controls, connectors and technical specifications

English web reference

Sontronics identifies the 8-pin microphone connector, 3-pin audio output, sweepable pattern, pad and filter. No revision is displayed.

Sontronics power and polar-pattern guidance

English online support

See the phantom power section for the specific Mercury exception and the polar patterns section for pickup examples.

PAC setup help

Connect the dedicated supply

The mic connects to its supply with the 8-pin lead. Take the supply’s 3-pin XLR output to the preamp. Sontronics instructs Mercury owners to keep phantom power switched off on that input.

Sontronics power guidance

Adjust room pickup

Begin in cardioid for a single voice. As you turn toward omni, listen for more of the room. Figure-of-eight picks up the front and rear and rejects sound from the sides. The Mercury control moves continuously between patterns.

Mercury pattern control

Distinguish pad from filter

Use the −10 dB pad to reduce level on a loud source. The 75 Hz filter addresses low-frequency content. Change one control at a time so you can hear what it does to the take.

Mercury technical specifications

Shop options

Sontronics Mercury Variable-Pattern Tube Condenser Microphone – Gold

This is the gold Mercury with its dedicated power supply and continuously variable pickup pattern.

View Sontronics Mercury at PAC