Sontronics DM-1B Kick Drum Microphone Setup & Placement

Sontronics · Microphones

Start here

Point the top end toward the kick drum’s front head. Connect the 3-pin XLR to a microphone input with 48 V phantom power, then set gain while the drummer plays.

Sources checked November 20, 2026

Silver Sontronics DM-1B kick drum microphone in its yoke mount

Official manufacturer documents

DM-1B operating notes and technical specifications

English web reference

Covers end-fire orientation, 48 V phantom power, the switchable pad and applications beyond kick drum. No revision is displayed.

Sontronics guide to recording drums

English placement guide

Read the DM-1B kick-drum section for two starting positions at the resonant head. Other sections cover different drum microphones.

PAC setup help

Point the end of the microphone

The capsule faces out of the top of the DM-1B. Aim that end at the front head or port of the kick drum. A side-on orientation puts the drum off the microphone’s main axis.

DM-1B operating notes

Compare attack and body

With a ported head, start just inside the opening for a more pronounced attack. Pull the mic back a few inches and compare the rounder sound. Judge both positions at a similar listening level.

Sontronics kick-drum placement guide

Check power and pad

The DM-1B takes 48 V phantom power over a 3-pin XLR connection. For a loud source, the −15 dB pad reduces microphone output. Sontronics specifies its 155 dB SPL figure with that pad engaged.

DM-1B technical specifications

Shop options

Sontronics DM-1B Condenser Microphone for Kick Drum and Bass

The silver DM-1B is the end-fire microphone described in the placement guide.

View Sontronics DM-1B at PAC