JBL 705i & 708i Installed Monitor Setup Guide

JBL Professional · Studio monitors

Match a passive 705i or 708i to its external amplifier and model-specific DSP tuning. The rear-panel wiring mode matters when selecting the file.

Sources checked November 20, 2026

Front view of the JBL 708i passive installed monitor

Official manufacturer documents

JBL 7 Series installed models setup guide

English PDF · 10 pages

Dated August 1, 2016. Covers both installed models, single-wire and bi-amplified operation, and model-specific tuning for the documented Crown and BSS systems.

PAC setup help

Identify the installed model

A 705i or 708i needs external amplification and compatible HARMAN processing. Use the guide’s amplifier and DSP section to identify the supported signal path before connecting a monitor controller.

Amplifier and processing requirements, pages 2–3

Check the single-wire plug

For a single-wire installation, JBL specifies that the supplied plug must remain in the Bi-Amplified connector. The wiring illustration shows why removing the unused plug can silence the monitor.

Speaker inputs and wiring, pages 3–4

Match the tuning to both choices

Select the file for your speaker model and wiring mode. The 705i and 708i use different tunings, and a bi-amplified setup has separate low- and high-frequency channels.

Model and channel selections, page 7

Shop options

Mackie MR824 powered studio monitor

An 8-inch studio-monitor option for a new powered setup. It accepts a line-level signal and includes its own amplification. An existing passive JBL speaker run requires a different signal path.

View alternative at PAC

JBL LSR708i 8-Inch Master Reference Monitor – Passive

Reference listing for the 8-inch installed model shown in the photo.

View JBL 708i at PAC