CAD Astatic 119S-19 Push-to-Talk Microphone Wiring Guide

CAD Audio · Microphones

Identify the audio leads and the separate switch contacts on the 119S-19 before matching it to a paging input.

Sources checked November 20, 2026

Push-to-talk button on the CAD Astatic 119S-19 microphone head

Official manufacturer documents

119S-19 specifications and lead functions

English PDF · 2 pages

CAD document 46873-47-01, Rev. 1, dated 6/10/04. Page 2 identifies the audio pair, shield and auxiliary switch contacts.

PAC setup help

Check how the button works

The 119S-19 uses a momentary push-to-talk button. CAD specifies a normally open microphone circuit. For an installation that needs a continuously open mic, check the 119L-19 guide.

Switch description, page 1

Separate audio from control

In CAD’s connection table, red is audio high, black is audio low, and the shield is microphone ground. White and green are an additional contact pair that closes when the button is held.

Connections table, page 2

Match the paging input

Use the input labels in the paging controller’s own manual to identify its microphone and trigger terminals. The 119S-19 sheet gives the mic lead functions and 500-ohm nominal impedance.

Connection and impedance specifications, page 2

Shop options

CAD Astatic AMC105SNO-19 push-to-talk microphone

Another push-to-talk paging model. Its omnidirectional pickup captures sound around the mic, while the 119S-19 is cardioid. Check the controller’s contact and wiring requirements before substituting it.

View alternative at PAC

CAD Astatic 119S-19 19-inch Cardioid Dynamic Gooseneck Paging Microphone with PTT

Model reference for the 119S-19 and its momentary switch.

View CAD Astatic 119S-19 at PAC