Audio-Technica AT2035 Large Diaphragm Condenser Microphone
This model is covered by the documentation on this page. Check the product page for the current configuration and availability.
View product & availabilityAudio-Technica · Microphones
Find the operating sheet and setup guidance for the Audio-Technica AT2035 XLR microphone, including its pad and high-pass filter.
Sources checked November 20, 2026
Read supported documents here on Pro Audio Clinic. Official PDF links open the manufacturer’s copy in a new tab.
Specification and operating sheet (manufacturer submittal sheet) · English
Practical pointers from Pro Audio Clinic, with links to the manufacturer’s instructions.
Connect the XLR output to a compatible microphone input; the AT2035 specification is 11–52 V phantom power.
Source: Specification and operating sheet, PDF page 1: Description and Operation and Maintenance
Use the 80 Hz high-pass switch when reducing unwanted low-frequency pickup is appropriate; locate the bent-line roll-off symbol.
Source: Specification and operating sheet, PDF page 1: Description and Operation and Maintenance
Find the -10 switch position for the pad when additional input headroom at the microphone is needed.
Source: Specification and operating sheet, PDF page 1: Description and Operation and Maintenance
Compare the documented model with relevant gear at Pro Audio Clinic. Product pages show current pricing and availability.
This model is covered by the documentation on this page. Check the product page for the current configuration and availability.
View product & availability